Archive] - [Archive Selection] - [Current Month] - ECOLAB DryExxEco Advanced-ETH Betriebsanleitung

10.6.2

[Archive] - [Archive Selection] - [Current month]

The views of the screen are identical in the day, month and year archives.
Only plants where valves are allocated are displayed.
Fig. 31: Program structure - Archive of current day
Displays „Archive of current month"
1. The „home screen"
the
ð The screen switches to the archive selection display Fig. 28.
2.
Press the
ð The screen switches to the section selection.
3. Select the required section using the
(e.g. Filler 2).
ð The screen switches to the circuit selection.
4.
Select the required circuit using the
3).
5. The „Archive Display" - „Archive of current day" is displayed.
Fig. 32: Archive of current day
1 Section number
2 BS-Mittel = belt lubricant (Bandschmiermittel)
3 Booster = additional activation of the dosing outside
automatic mode.
4 Selection of the line for the operating time
5 Selection of the „Line units" with the number of items
(unit counter, e.g. bottle counter, crate counter, etc.).
Ä Chapter 10.3 „ „home screen" (start screen)" on page 54 use
button to switch to the archive display.
button to select „Current month" .
(e.g. lubricant circuit 2, or valve 2) or
Layout of the software display
Overview: Archive > Archive - Archive Selection - Current month
button (e.g. Filler 1) or
button (e.g. lubricant circuit 1 or valve 1),
(e.g. lubricant circuit 3, or valve
6 Specification of the selected archive. In this case
„Archive of current day"
7 Selection of consecutive valve number
8 Circuit number
67 Rev. 02-09.2017