Handlebar - Yamaha YZ Serie Fahrer- Und Wartungshandbuch

EC5B0000
4 Nm (0.4 m•kg, 2.9 ft•lb)
1 Handlebar removal
Extent of removal:
Extent of removal Order
Preparation for
removal
1
1 Nm (0.1 m•kg, 0.7 ft•lb)
Part name
HANDLEBAR REMOVAL
Number plate
1 Clutch cable
2 Clutch lever holder
3 "ENGINE STOP" button
4 Master cylinder
5 Throttle cable cap
6 Throttle cable
7 Throttle
8 Cap cover
9 Collar
10 Grip (left)
11 Handlebar holder (upper)
12

Handlebar

HANDLEBAR
9 Nm (0.9 m•kg, 6.5 ft•lb)
Q'ty
Remove the clamp portion only.
1 Disconnect at the lever side.
1
1
1 Refer to "REMOVAL POINTS".
1 Turn over the cap cover.
1 Disconnect at the throttle side.
1 Loosen the bolts.
1
1
1 Refer to "REMOVAL POINTS".
2
1
5-40
CHAS
28 Nm (2.8 m•kg, 20 ft•lb)
2 Nm (0.2 m•kg, 1.4 ft•lb)
4 Nm (0.4 m•kg, 2.9 ft•lb)
Remarks