General Specifications - Yamaha YZ Serie Fahrer- Und Wartungshandbuch

EC200000
SPECIFICATIONS
EC211000

GENERAL SPECIFICATIONS

Model name:
Model code number:
Dimensions:
Overall length
2
Overall width
Overall height
Seat height
Wheelbase
Minimum ground clearance
Basic weight:
With oil and full fuel tank
Engine:
Engine type
Cylinder arrangement
Displacement
Bore ´ Stroke
Compression ratio
Starting system
Lubrication system:
Oil type or grade (2-Cycle):
Transmission oil
Periodic oil change
Total amount
Coolant capacity (including all routes):
Air filter:
Fuel:
Type
Tank capacity
GENERAL SPECIFICATIONS
YZ125LC (EUROPE)
YZ125N1 (USA)
YZ125(N) (CDN, AUS, NZ, ZA)
5MV1 (USA, CDN, ZA)
5MV2 (EUROPE)
5MV4 (AUS, NZ)
USA, CDN, ZA
2,139 mm
(84.2 in)
827 mm
(32.6 in)
1,318 mm
(51.9 in)
993 mm
(39.1 in)
1,444 mm
(56.9 in)
400 mm
(15.7 in)
95.0 kg (209.4 lb)
Liquid cooled 2-stroke, gasoline
Single cylinder, forward inclined
124 cm 3
54 ´ 54.5 mm (2.126 ´ 2.146 in)
8.7~10.8 : 1
Kick starter
Premix (30 : 1)(Yamalube 2-R)
Yamalube 4 (10W-30) or SAE 10W-30 type SE
motor oil
0.65 L (0.57 Imp qt, 0.69 US qt)
0.70 L (0.62 Imp qt, 0.74 US qt)
1.00 L (0.88 Imp qt, 1.06 US qt)
Wet type element
Except for AUS: Premium unleaded fuel
For AUS: Unleaded fuel only
8.0 L (1.76 Imp gal, 2.11 US gal)
2-1
SPEC
EUROPE
2,136 mm
(84.1 in)
¬
1,313 mm
(51.7 in)
994 mm
(39.1 in)
¬
¬
(4.36 lmp oz, 4.19 US oz)
with a research octane
number of 95 or higher
AUS, NZ
2,139 mm
(84.2 in)
¬
1,314 mm
(51.7 in)
993mm
(39.1 in)
¬
¬