Front Brake And Rear Brake - Yamaha YZ Serie Fahrer- Und Wartungshandbuch

EC5A8100
REAR BRAKE
7 Nm (0.7 m•kg, 5.1 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
26 Nm (2.6 m•kg, 19 ft•lb)
1 Caliper removal
Extent of removal:
Extent of removal Order
Preparation for
removal
1
2
1 3
3

FRONT BRAKE AND REAR BRAKE

2 Brake hose removal
Part name
REAR BRAKE REMOVAL
Hold the machine by placing the
suitable stand under the engine.
Rear wheel
Drain the brake fluid.
1 Pad pin pulg
2 Pad pin
3 Caliper
4 Brake hose holder
5 Union bolt
6 Brake hose
7 Brake pedal
8 Reservoir tank
9 Reservoir hose
10 Master cylinder
4 Nm (0.4 m•kg, 2.9 ft•lb)
30 Nm (3.0 m•kg, 22 ft•lb)
3 Nm (0.3 m•kg, 2.2 ft•lb)
6 Nm (0.6 m•kg, 4.3 ft•lb)
3 Master cylinder removal
Q'ty
w
Support the machine securely so there is no dan-
ger of it falling over.
Refer to "FRONT WHEEL AND
REAR WHEEL" section.
Refer to "REMOVAL POINTS".
1 Remove when loosening the pad pin.
1 Loosen when disassembling the caliper.
1
2
2
1
1
1
1
1
5-11
CHAS
18 Nm (1.8 m•kg, 13 ft•lb)
Remarks