Assembly And Installation - Yamaha YZ Serie Fahrer- Und Wartungshandbuch

a
EC564101
Bearing and ball race
EC565000

ASSEMBLY AND INSTALLATION

EC565113
Under bracket
NOTE:
Apply the lithium soap base grease on the dust
seal lip and bearing inner circumference.
NOTE:
Apply the lithium soap base grease on the bear-
ing and ball race cover lip.
NOTE:
Apply the lithium soap base grease on the bear-
ing and the portion a of the steering shaft.
1
5-49
STEERING
1. Wash the bearings and ball races with a sol-
vent.
2. Inspect:
9 Bearing 1
9 Ball race
Pitting/Damage
ball races as a set.
Install the bearing in the ball races. Spin the
bearings by hand. If the bearings hang up or
are not smooth in their operation in the ball
races, replace bearings and ball races as a
set.
1. Install:
9 Bearing (lower) 1
2. Install:
9 Ball race
9 Bearing (upper) 1
9 Ball race cover 2
3. Install:
9 Under bracket 1
CHAS
Replace bearings and