Yamaha YZ Serie Fahrer- Und Wartungshandbuch Seite 182

FRONT FORK OIL SEAL AND DUST SEAL CLEANING/
FRONT FORK REBOUND DAMPING FORCE ADJUSTMENT
EC36D001
FRONT FORK OIL SEAL AND DUST SEAL
CLEANING
1. Remove:
9 Protector
9 Dust seal 1
NOTE:
Use a thin screw driver, and be careful not to
damage the inner fork tube and dust seal.
2. Clean:
9 Dust seal a
9 Oil seal b
NOTE:
9 Clean the dust seal and oil seal after every run.
9 Apply the lithium soap base grease on the in-
ner tube.
EC36H002
FRONT FORK
FORCE
ADJUSTMENT
1. Adjust:
9 Rebound damping force
Stiffer a a
Increase the rebound damping
force. (Turn the adjuster 1 1 in.)
Softer b b
Decrease
damping force. (Turn the
adjuster 1 1 out.)
Extent of adjustment:
Maximum
Fully turned in
position
9 STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
12 clicks out
*10 clicks out
*For EUROPE
3-27
INSP
ADJ
REBOUND DAMPING
the rebound
Minimum
20 clicks out
(from maximum
position)