Fitting The Drill Head - Optimum Optidrill B 24H Betriebsanleitung


Mount the crank handle for the height-adjustment of the drilling table.

Clamp the crank handle with the hexagon socket screw.
Hexagon socket
screw
Crank handle
3.4.4

Fitting the drill head


Put the intermediate plate on the drilling column.

Fix the intermediate plate with the cap screws on the drilling column.

Put the drilling head on the intermediate plate and turn it as much until is aligned with the
stand.

Fix the drilling head with the cap screws on the intermediate plate.
Hexagon socket screws
Intermediate plate
Hexagon socket screws
GB
B24H | B24HV | B28H | B28HV
102
Abb.3-6: Assembly crank handle
Abb.3-7:
Translation of the original instructions
Assembly drill head
Version 2.2.6 - 2020-07-21