Safety Check - Optimum OPTIdrill DH 35G Betriebsanleitung

a drilling table with T-slots to fix the workpiece or a vice,

a drill chuck guard, in order to prevent interference with the rotating tool.

INFORMATION
The geared drill can only be switched on if the drill chuck guard is closed.
WARNING!
Although the isolating safety devices provided and delivered with the machine are
designed to reduce the risks of workpieces being ejected or parts of tools or workpieces
breaking off, they cannot eliminate these risks completely. Always work carefully and
observe the limits of the machining process.
1.10

Safety check

Check the geared drill before each start-up or at least once per shift. Inform the person respon-
sible immediately of any damage, defects or changes in the operating function.
Check all safety devices
at the beginning of each shift (with the machine stopped),

once a week (with the machine in operation) and

after all maintenance and repair work.

Check that prohibition, warning and information signs and the labels on the geared drill
are legible (clean them, if necessary)

are complete (replace if necessary).

INFORMATION
Organise the checks according to the following table;
General check
Equipment
Guards
Signs,
Markers
Date:
Functional check
Equipment
EMERGENCY STOP
push button
Drill chuck guard
Date:
EN
DH35G
64
Check
Mounted, firmly bolted and not damaged
Installed and legible
Checked by (signature):
Check
After actuating the emergency stop push button the geared
drill must be switched off.
The geared drill can only be switched on if the drill chuck
guard is closed. The engine must switch off when the drill
chuck guard is opened during operation.
Checked by (signature):
Translation of original instruction
OK
OK
Safety
Version 1.0.4 - 2022-02-15