Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Interval
Where?
EN
DH35G
88
What?
How?
For oil change use an appropriate collecting tray of sufficient
capacity.
Remove the filler hole plug.
Remove the oil drain plug.
If necessary use sealing tape for drain plug.
Fill in the open lubricating system of the geared drill about 3
litres of oil.
Check if the oil level is correct via the sight glass. The sight
glass (oil level dropped) must be half covered.
Filler hole
Sight glas, oil
level dropped
Oil outlet
Lubricate all oiler cups with machine oil, do not use grease
guns or the like.
Oiler cup
Translation of original instruction
Img.6-1: Gear oil level
Img.6-2: Oiler cup
Version 1.0.4 - 2022-02-15
Maintenance
Werbung
Inhaltsverzeichnis
