Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING!
Before starting the machine you must be sure that
no dangers generated for persons,
the machine is not damaged.
6.2
Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved con-
ditions.
Interval
Where?
Start of shift
After each
maintenance or
repair work
Every month
Every month
Maintenance
Version 1.0.4 - 2022-02-15
What?
How?
Examination for outside damages.
Safety check on page 64
Lubricate the drill column regularly with commercial oil,
machine oil, engine oil.
Lubricate the toothed rod regularly with commercial grease
(e.g. friction bearing grease).
Lubricate all oiler cups (height adjustment drilling table) with
machine oil, do not use grease guns or the like.
Translation of original instruction
DH35G
EN
87
Werbung
Inhaltsverzeichnis
