Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.6.1
Assembly drawing
18
155
155
150
80
3.7
Lubrication
With the first lubrication and greasing your new machine, oil in
the gear and the coolant system is filled. Once these opera-
tions have been carried out, the machine can be started up.
The oil tank of the gearbox must be filled to half way up the
sight glass. Filling quantity about 4.5 liters.
The oil must be changed 200 hours after being filled for the
first time, then after every 2000 operating hours.
Use the oil types recommended in the reference table
Lubricant on page 127. This table can be used to compare
the characteristics of each different type of oil of your
choice.
Fill the coolant tank. Filling quantity about 6 litres. Fill the
coolant tank over the drilling table.
Version 1.0.4 - 2022-02-15
475
14
24
Filler hole
Sight window
Translation of original instruction
Attachment (3)
DH35G
EN
75
Werbung
Inhaltsverzeichnis
