Repair; Customer Service Technician - Optimum OPTIdrill DH 35G Betriebsanleitung

Interval Where?
INFORMATION
The spindle bearing is lifetime-lubricated. It is not necessary to lubricate it again.
6.3

Repair

6.3.1

Customer service technician

For any repair work request the assistance of an authorised customer service technician. Con-
tact your specialist dealer if you do not have customer service's information or contact Stürmer
Maschinen GmbH in Germany who can provide you with a specialist dealer's contact informa-
tion. Optionally, the
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt
can provide a customer service technician, however, the request for a customer service techni-
cian can only be made via your specialist dealer.
If the repairs are carried out by qualified technical personnel, they must follow the indications
given in these operating instructions.
Optimum Maschinen Germany GmbH accepts no liability nor does it guarantee against damage
and operating malfunctions resulting from failure to observe these operating instructions.
For repairs, only use
faultless and suitable tools,

original parts or parts from series expressly authorised by Optimum Maschinen Germany

GmbH.
Maintenance
Version 1.0.4 - 2022-02-15
What? How?
ATTENTION!
Parts may fly off at high speed. When disassembling
the key housing, please make sure that the machine
is only maintained and prepared by qualified staff.
Translation of original instruction
DH35G EN
93