Desiccant Bag; Setting Of The Led Illuminators And Synchronization Mode With The Camera; Description Of The Led Illuminator - Videotec ULISSE PLUS NETCAM Bedienungsanleitung

8.9 Desiccant bag

Attach the desiccant bag using the bracket for this
purpose.
Fig. 36
Fig. 37
Available in the versions with LED illuminators.
26
8.10 Setting of the LED
illuminators and synchronization
mode with the camera
Once the adjustment is done the
illuminator on the left (MASTER)
synchronizes and controls the illuminator
on the right (SLAVE).
The dusk switch detects the room light and controls
the activation and deactivation of the illuminators
when brightness reaches the level set by the user.
When the LED illuminators are active the camera
goes to night mode with the special ONVIF control.
8.10.1 Description of the LED
illuminator
Do not remove the transparent screw of the
twilight sensor in order not to affect the
security and operation of the illuminator.
• Twilight sensor: Detects the light level.
• Cable: Power supply and control.
• Switch-on threshold regulator: The
potentiometer allows adjusting the sensitivity
threshold to switch on the illuminator.
• Infrared power control: The potentiometer allows
adjusting the power of the illuminator.
Twilight sensor
Switch-on threshold
regulator
Fig. 38
Cable
Infrared power control
MNVCUPTPLUS3_1511_EN