Bosch Rexroth PRC 7 00-L-0301-Serie Typspezifische Anleitung Seite 79

R911405013 | PRC 7x00-Lx/Wx-0301
Spotnumber Spotname
1136 S_0_1136_PickupTip
1137 S_0_1137_TipSetting_soft
1138 S_0_1137_TipSetting_medium
1139 S_0_1137_TipSetting_strong
1162 S_0_0_1162_InkJogClose
1163 S_0_0_1163_InkJogOpen
Bosch Rexroth AG | Electric Drives and Controls
Description
• Pick up electrode tips.
• In the automatic tip changer, the gun can be
closed with low force when the tip is picked up
and the electrode tip is fixed on the electrode
shaft.
• The sheet thickness is parameterized
sufficiently large to have enough space in the
tip changer. Prerequisites for this are loaded
and activated parameters, as well as drive and
positioning enable.
• The reference run must also be completed.
• Press on the electrode tips.
• During the setting stroke, the gun close and
press the electrode tips onto the electrode
shaft with a defined force (2kN). Prerequisites
for this are loaded and activated parameters,
as well as drive and positioning enable.
• The reference run must be completed.
• Press on electrode tips.
• During the setting stroke, the gun close and
press the electrode tips onto the electrode
shaft with a defined force (2.5kN).
Prerequisites for this are loaded and activated
parameters, as well as drive and positioning
enable.
• The reference run must be completed.
• Press on electrode tips.
• During the setting stroke, the gun close and
press the electrode tips onto the electrode
shaft with a defined force (3.5kN).
Prerequisites for this are loaded and activated
parameters, as well as drive and positioning
enable.
• The reference run must also be completed.
• The service program closes the gun
incrementally by a fixed distance starting from
the current opening position.
• The distance can be set in the servo gun
parameter "jog increment".
• Prerequisites for the execution of this service
program are loaded and activated parameters,
as well as drive and positioning enable and a
completed reference travel.
• With the service program, the gun is opened
incrementally by a fixed distance starting from
the current opening position.
• The distance can be set in the servo gun
parameter " jog increment ".
• Prerequisites for the execution of this service
program are loaded and activated parameters,
drive and positioning enable and a completed
reference run.
79/92