Advanced Settings; To Access Advanced Features; Reset Default Settings (Rset) - Gastroback DESIGN ESPRESSO ADVANCED PROFESSIONAL Bedienungsanleitung

Note:
Custom Long Black settings can be re-
programmed by following the above
steps 1-8.

ADVANCED SETTINGS

rSEt Reset default settings
dESc Descaling the water system
SEt Select the temperature unit
LCD Backlight (LCD)
SPOt Spotlights
StEA Setting the steam temperature
Air Air pump delay
Snd Setting the volume of the
acoustic signals
FAn Fan control
Cln Enable (A On) or disable (A
OF) the cleaning message
CLoC Selecting clock format
vOL Selecting the type of shot con-
trol (volume or time duration)

To Access Advanced Features

1. With the Espresso Machine turned
off, press and hold the 1 CUP button,
then press and hold the POWER but-
ton together for 3 seconds.
2. Rotate the SELECT dial to the desired
function. Press the SELECT dial to
access the accompanied settings.
3. You may exit Advanced Features at
any time and return to standby mode.
Simply press the MENU button.
Note:
The Espresso Machine will exit the
Advanced Features, if there is no user
input for 30 seconds, or the POWER
button, or MENU button is pressed.

Reset Default Settings (rSEt)

Use this function to reset all programma-
ble values back to the default settings. The
machine has the following default settings:
Espresso Temperature: 93 °C
Pre-infusion, Duration: 7 (seconds)
Pre-infusion, Pressure: 60 (percent)
Milk Temperature: 60 °C
Steam Temperature: 130 °C
Air Pump Delay: 2 seconds
Sounds Volume: low
Cleaning Alert (CLEAN ME): on
Auto Start: off
Auto Start Time: 8:00am
Auto Off: 20 minutes
Clock, Time: 12:00am
Water Hardness (Hrd): 3
1 CUP Extraction, Duration: 20
seconds
2 CUP Extraction, Duration: 30
seconds
+
POWER
93