Herunterladen Diese Seite drucken

Technical Data; General Power Tool Safety Warnings - Parkside PTS 710 A2 Originalbetriebsanleitung

Vorschau ausblenden

Werbung

Inhaltsverzeichnis

Technical data

Nominal output
Nominal voltage
Idle speed
Max.
cutting depth
Thread size
Protection class
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Vibration emission value
Cutting wood
Uncertainty
Cutting metal
Uncertainty
NOTE
The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with
another tool.
The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
PTS 710 A2
710 W
230 V ∼, 50 Hz (AC)
n/n
5500 rpm
0
27 mm
M6
II /
(double insulation)
L
= 100 dB (A)
PA
K
= 3 dB
PA
L
= 111 dB (A)
WA
K
= 3 dB
WA
a
= 2.2 m/s
2
h,W
K = 1.5 m/s
2
2
a
= 2,6 m/s
h,M
K = 1.5 m/s
2
WARNING!
Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
Try to keep the load as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General power tool
safety warnings
WARNING!
Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
GB │ IE │ NI │ CY
 3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

353273