Technical Data; General Power Tool Safety Warnings - Parkside PMTS 180 A1 Originalbetriebsanleitung

Technical data

Rated voltage
Rated power consumption
Rated idle speed
Cutting disc mounting
Thread size
Maximum speed of the cutting
disc
Working speed of the cutting
disc
Cutting disc diameter
Cutting disc thickness
Inclined cuts
max. cut depth
50mm
Protection class
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear hearing protection!
PMTS 180 A1
230 V ∼, 50 Hz
(alternating current)
1280 W
n 7700 rpm
0
Ø 22.23 mm
M8
8500 rpm
max. 80 m/s
Ø 180 mm
1.6 mm
0°–45°
50 mm at 0°
mitre angle
II /
(double insulation)
L = 93 dB(A)
PA
K = 3 dB
PA
L = 106 dB (A)
WA
K = 3 dB
WA
WARNING!
► Depending on the manner in which the
power tool is being used and, in particular,
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate and may sometimes exceed the
values given in these instructions. Regular use
of the power tool in this way may cause the
user to underestimate the vibration. Try to
keep the vibration loads as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
GB │ IE │
17 ■