Technische Daten - Siemens SIMATIC RF300 Systemhandbuch

WARNING
WARNING – POTENTIAL ELECTROSTATIC CHARGING HAZARD.
All Models must be mounted in an enclosure with a minimum ingress protection rating of
at least IP54 and must be Class I, Zone 2 certified, and used in an environment of not more
than pollution degree 2.
The device may only be operated so that there is adequate protection against ultraviolet light.
The device must not be operated in the area influenced by charge-producing processes.
The device must be set up and installed so that it is mechanically protected.
After disconnecting connections (signal/supply cable), before the connectors are plugged in
again, the connectors must be checked for contamination and, if necessary cleaned.
5.3.2.8

Technische Daten

Tabelle 5-17 Technische Daten des Readers RF350R
Produkttyp-Bezeichnung
Funkfrequenzen
Betriebsfrequenz Nennwert
Elektrische Daten
Ausgangsleistung (Antenneneingang)
Maximale Reichweite
•
•
•
•
•
Maximale Datenübertragungsgeschwindigkeit
Reader ↔ Transponder
•
•
Übertragungsgeschwindigkeit
Schreib-/Leseabstände des Readers
SIMATIC RF300
Systemhandbuch, 02/2021, C79000-G8900-C345-09
WARNUNG
ANT 1
ANT 3
ANT 12
ANT 18
ANT 30
lesen
schreiben
SIMATIC RF350R
13,56 MHz
≃ 0,4 W
1)
• 140 mm
• 50 mm
• 16 mm
• 35 mm
• 55 mm
RF300-
Transponder
• ≤ 8000
Byte/s
• ≤ 8000
Byte/s
19,2, 57,6, 115,2 kBd
siehe Kapitel "Felddaten von Transpondern, Rea‐
dern und Antennen (Seite 49)"
5.3 SIMATIC RF340R/RF350R
6GT2801-4BA10
6GT2801-4BA10-0AX2
ISO- ISO-Transpon‐
Transponder der
(MDS D) (MDS E)
• ≤ 3300 • ≤ 3400
Byte/s Byte/s
• ≤ 1700 • ≤ 800
Byte/s Byte/s
Reader
169