Heidolph Hei-VAP Precision Originalbetriebsanleitung Seite 65

Vacuum box and sensor
The support for vacuum box and vacuum
sensor is located at the back of device.
Connect vacuum box
➜ Place vacuum box on the guide rails
behind the heating bath.
➜ The vacuum box brackets must be
located above the holes.
➜ Place 2 enclosed screws in the holes
with thread through the bracket of the
vacuum box.
➜ Tighten screws.
Downloaded from www.Manualslib.com
Assembly
manuals search engine
Vacuum box
Connections Vacuum box
Connect
Vacuum sensor
Connect
Vacuum pump
Ventilation /
Inert gas
Connect
vacuum box
to device
Connect
Vacuum tube to
Condenser
65
Vacuum sensor