Control Panel - Heidolph Hei-VAP Precision Originalbetriebsanleitung

Control panel

Control panel can be removed from console to be fixed to a wall or fume hood.
Connection cable is 1 meter long.
Open cable carrier
➜ Grab control panel on the top left side
and tip it to the front.
➜ Avoid pressure to the LCD display.
✓ The cable winding is surrounded by a
shell.
➜ Pull shell of cable winding open.
➜ Wrap cable to the desired length on or
off.
Position control panel
➜ If necessary turn shell 180°.
➜ Press shell and control panel together
until they lock audibly.
➜ Place control panel on a clean and
stable surface or attach it to a wall.
Insert control panel into console
➜ Turn shell into initial position with the
wide side downwards.
➜ Wrap cable up to the yellow colored
cable mark.
➜ Press shell and control panel together.
➜ If necessary plug in connecting plug
with white colored tag upwards into
console.
➜ Place control panel with an angle of approx. 30° forward into the console.
➜ Press control panel into console until it audibly locks.
Downloaded from www.Manualslib.com
Assembly
Warning/ Avertissement:
Risk of poisoning! / Risque d'intoxication !
If operating with control panel inside of fume hood, there is a risk of
harm if fume hood is opened during process./
En cas d'exploitation avec le panneau de contrôle à l'intérieur de la
hotte, il existe un risque physique si la hotte est ouverte pendant le
processus.
Remove control panel and place it outside the fume hood./
Retirer le panneau de contrôle et le placer hors de la hotte.
manuals search engine
Yellow
cable mark
62