Heidolph Hei-VAP Precision Originalbetriebsanleitung Seite 36

Gradient
Menu entry
Heating bath
Rotation
Hysteresis
Enter pressure/
timesteps
Accept
Softkey 1
Softkey 3
Downloaded from www.Manualslib.com
Operation
Sub-menu Element
Pressure/Time
Step
Vacuum
Duration
Sum of Time
(Total time)
Enter basic Jump back to
Settings main menu
„gradient"
Accept
Store Favorite
> store under
abc
ABC
Delete
[Character]
enter at least
one character
Store Favorite
Graph/Values
manuals search engine
Value range
20 °C ... max. temp. of the heating bath
not higher than 210 °C.
10 ... 280 rpm in 1 rpm increments;
default value: 100 rpm
1 to 50 mbar; default value: 10 mbar
Program step; 20 program steps
consisting of the duration and pressure
can be entered.
1 to 1200 mbar; default value:
1000 mbar
Duration of a program step in minutes.
The pressure is reduced linear or
increased as ramp during this time,
depending on which pressure was
entered during the previous step.
Adds the duration of the previous steps.
The number specifies the time since the
start of the process. The last number
equals the total processing time.
abc Sets the entry to lowercase letters.
ABC Sets the entry to uppercase
letters.
Briefly pressing the Select Knob
Hei-GUIDE deletes the last character on
the right side, pressing for an extended
period (>1.5 s) deletes all characters of
a program name.
a b ... z
A B ... Z
0 ... 9
. : ; ... '
Softkey 4 Esc
36