Attachments; Technical Data - Heidolph Hei-VAP Precision Originalbetriebsanleitung

Technical data


Hei-VAP Precision
Standard supply voltage
Operational voltage (V)
Supply power (W)
Protection class
(DIN EN 60529)
Lift distance (mm)
Drive
Rotation speed (rpm)
Speed control
Heating bath
Heating capacity (W)
Temperature range (°C)
Temperature control
Temperature accuracy
Heating bath (°C)
Safety temperature protection
bath
Overheat protection (°C)
Digital display
Programming ramps
Condensing surface (cm
Vacuum controller*
Timer
Airborne noise level
Permissible ambient
conditions
Evaporation rates (L/h)
ΔT* = 40°C
(continuous operation)
Weight (without glassware)
(kg)
Lift
Lifting speed (mm/s)
Dimensions with glassware
set G3 (w x d x h) (mm)
* Only possible in conjunction with vacuum systems
** ΔT = Difference between the heating bath temperature and the vapor temperature
Downloaded from www.Manualslib.com

Attachments

230 V (50/60 Hz)
100 - 240
1400
▪ IP 20 device
▪ IP 67 cable heating bath
155
EC motor
10 - 280
electronic
▪ inner Ø: 253 mm, outer Ø: 291 mm
▪ material: V4A-steel (1.4404) stainless steel X2CrNiMo 17-12-2
▪ Volume 4.5 L
1,300
20 - 100 H
electronic
±1
cut off at 5 °C difference to set temperature
250
▪ Heating bath temperature (°C)
▪ Vapor temperature (°C),
▪ Rotation speed (rpm)
yes
) 1,400
2
integrated
yes
< 85 db(A)
▪ 5 - 31 °C at 80 % relative humidity, no condensation
▪ up to 2,000 m (6,500 feet) height above sea level
▪ Toluene
▪ Acetone 5.8
▪ Ethanol
▪ Water
17
manuals search engine
Attachments
O / 20 - 210 oil
2
(required: vapor temperature sensor)
32 - 40 °C linear decrease down to 50 % relative humidity
8.5
3.5
1.2
Manual
-
739 x 490 x 887
75
Motor
25
739 x H 420 x 887