Menu Topology - Heidolph Hei-VAP Precision Originalbetriebsanleitung

Menu topology


Actual value display for all modes
Menu entry
Vacuum
Vapor
Rotation
Heating bath
Softkey 1
Softkey 2
Softkey 3
Softkey 4
SET pressure mode
Menu entry
Heating bath
Rotation
Vacuum
Hysteresis
Timer
Accept (OK)
Softkey 1
Softkey 4
AUTOeasy mode
Menu entry
Heating bath
Rotation
Pump type
Timer
Accept
Softkey 1
Softkey 4
Downloaded from www.Manualslib.com
Operation
Value range
1 and 1200 mbar; default value: 1000 mbar
Vapor temperature measured at the vapor temperature sensor.
10 and 290 rpm in 1 rpm increments; default value: 100 rpm
20 °C and the max. temperature of the heating bath (to be
assigned in Setup), however, no more than 210 °C
Start Vacuum
Start all / Stop all
Max. Vacuum
Stop Vacuum
Value range
20 °C and the max. temperature of the heating bath (to be
assigned in Setup), however, no more than 210 °C.
10 and 290 rpm in 1 rpm increments; default value: 100 rpm
1 and 1200 mbar; default value: 1000 mbar
1 to 50 mbar; default value: 10 mbar
1 to 1440 min; in 1 min; default value: 0 min; 0=off
Store Favorite
Esc
Value range
20 °C and the max. temperature of the heating bath (to be
assigned in Setup), however, no more than 210 °C.
10 and 280 rpm in 1 rpm increments; default value: 100 rpm
"vario control" and "vario tec" ; default value: "variocontrol" Blank
out by using vacuum-valve
1 to 1440 min; in 1 min; default value: 0 min; 0=off
Store Favorite
Esc
manuals search engine
34