Start-Up; Connect/Disconnect Power Cord; Switch Unit On And Off - Heidolph Hei-VAP Precision Originalbetriebsanleitung

Connect/disconnect power cord


Connect power cord
The power cord comes with a three-wire
plug and a recess on the bottom side.
The socket is located on the back side of
the unit.
➜ Connect plug to the socket with the
recess facing down.
➜ Push plug up against socket until
securely attached.
➜ Connect plug to power socket.
Disconnect power cord
➜ Disconnect plug from power socket first.
➜ Then disconnect plug from socket on unit.

Switch unit on and off


The ON/OFF switch is situated on the left
side of the device beneath the control panel.
Switch unit on
➜ Press the ON/OFF switch on the right
side.
✓ The display switches on and shows set
parameters.
✓ The unit is switched on.
Switch unit off
➜ Press the ON/OFF switch on the left side.
✓ The display switches off.
✓ The unit powers off.
Downloaded from www.Manualslib.com

Start-Up

manuals search engine
Start-Up
Unit plug
Unit socket
ON/OFF switch: ON
14
Power cord