Condenser - Heidolph Hei-VAP Precision Originalbetriebsanleitung

Condenser

PTFE seal
➜ Slide PTFE seal with the labeling
"Motor Side" facing drive onto the
vapor tube.
✓ The PTFE seal is tightened as far as it
will go.
Condenser:
Glassware set G1 and G3
➜ Push coupling of glassware over
condenser flange.
➜ Push tension ring over condenser
flange.
➜ Screw condenser to the drive
hand-tight.
✓ Condenser is mounted to the drive.
Downloaded from www.Manualslib.com
Assembly
Warning / Avertissement:
Risk of glass breakage! / Risque de bris de verre !
If a flask is damaged, glass can break causing serious harm./
Si un ballon est endommagé, cela peut entraîner un bris de verre
supplémentaire et causer des blessures graves.
Work with undamaged glass only and check all glassware regularly for
any damage./
Travailler uniquement avec du verre sans défaut et vérifier régulière-
ment que toutes les pièces en verre sont exemptes de dommages.
manuals search engine
PTFE seal
Tension ring Coupling
54