Condenser: Glassware set G6
(Condenser for reflux distillation)
Additional assembly parts on the vapor
tube:
▪ PTFE seal ring
▪ Spacer sleeve
▪ Additional coupling
✓ Vapor tube together with PTFE seal is
mounted.
➜ Insert PTFE seal ring into spacer
sleeve.
➜ Place spacer sleeve including PTFE
seal ring with the narrow side facing to
vapor tube on condenser side.
➜ Screw on additional coupling with
external thread pointing left.
➜ Tighten distributor with coupling
including tension spring on external
thread.
➜ Insert condenser to the upper joint of
distributor.
➜ Screw inlet tube with inlet valve onto
opening opposite vapor tube
(see chapter "Assembly, Inlet tubes").
Downloaded from
www.Manualslib.com
Assembly
manuals search engine
Spacer sleeve
PTFE seal ring
Distributor
Distributor
56
Additional coupling
Inlet tube