Menu Navigation - Heidolph Hei-VAP Precision Originalbetriebsanleitung

Menu navigation


The basic steps of operating the rotary evaporator Hei-VAP Precision will be explained in
this chapter.
The parameters for the distillation are set and monitored via the control panel.
The set parameters are stored. The last used parameters will appear after a restart.
The actual value display is always the
start screen. All current actual values are
displayed as large numbers and the target
values as small numbers.
The programs of the top menu bar are
highlighted by turning the select knob
Hei-GUIDE. The Hei-GUIDE walks through
the programs going from left to right. An
„<" or ">" shows the direction in which
the rotary pushbutton controller can be
turned, in order to reach the non-visible
menu elements.
The highlighted menu element is activated
by pressing the Select Knob Hei-GUIDE
and the status screen changes to the
respective menu.
The user can change the displayed settings in these menus.
Turning the Select Knob Hei-GUIDE is sufficient to change between individual entries. The
selected entry is always highlighted.
The selected entry will be called up when pressing the Select Knob Hei-GUIDE. The
desired value can be set when turning the Select Knob Hei-GUIDE.
The lower functions in the menu are activated via the grey softkeys.
1
Pushbutton for the button activation
of soft key display
2 Menu line of programs
3
Pushbutton heating bath on/off
(hard key)
4 Soft key display functions
Downloaded from www.Manualslib.com
Start-Up
manuals search engine
8
7
5
Pushbutton rotation start/stop
(hard key)
6 Rotary pushbutton controller
(Hei-GUIDE)
7
Pushbutton lift down
8 Pushbutton lift up
18
2
4
1
3
5
6