Distillation Parameters: Favorites - Heidolph Hei-VAP Precision Originalbetriebsanleitung

Defi ne the shutoff response of the heating bath in the setup.
1. Select the menu element program „Setup" by turning the Select Knob Hei-GUIDE (6).
2. Select the entry „Bath Power at End" by turning the Select Knob Hei-GUIDE (6) and
call up the selected entry to be changed by pressing the Select Knob Hei-GUIDE (6)
again.
The heating bath will not be switched off after the termination of the timer at the end
of the process „on" and will shut off if "off" is selected.
3. Pressing it again confi rms the change.
4. Select „accept (OK)" to change the actual value display.

Distillation parameters: Favorites


Up to 30 different data records can be stored.
A data record contains all parameters required for the respective process management
based on the modes.
Storing the data record
✓ The vacuum control is not activated.
✓ Parameters are set.
✓ You are in the menu view of a mode (SET pressure, AUTOeasy, AUTOaccurate,
gradient)
➜ Press softkey „Store Favorite".
1. Select the letter by using the Select Knob Hei-GUIDE (6) and combine a name by
pressing the Select Knob Hei-GUIDE (6).
2. Accept the name with softkey „Store Name" (1) or discard the name with „Esc" (1)
and interrupt the storage.
You will return to the menu view of the respective mode after saving.
Call up a data record (Menu favorites)
✓ The vacuum control is not activated.
1. Select the menu element „Favorites" by turning the Select Knob Hei-GUIDE (6).
2. Select the program name by turning the Select Knob Hei-GUIDE.
3. Call up the options by pressing Select Knob Hei-GUIDE; the following options will be
available:
▪
Apply
▪ Rename
▪ Copy
▪ Delete
Downloaded from www.Manualslib.com
Operation
The entry is set to lowercase letters with element „abc".
The entry is set to uppercase letters with element „Abc".
The last character on the right side is deleted by briefl y pressing the
„delete" element.
manuals search engine
28