Heidolph Hei-VAP Precision Originalbetriebsanleitung Seite 39

➜ With 1-2 turns counter clockwise unscrew coupling of the flask clamp Easy-Clip.
➜ Hold evaporating flask with one hand and open the Easy-Clip.
➜ Remove evaporating flask carefully.
Mount and remove receiving flask
Mount receiving flask
➜ Hold receiving flask with open end
onto the flange of the condenser.
➜ Slide clamp over flange of condenser
and receiving flask.
➜ Tighten knurled screw of clamp
carefully.
✓ The receiving flask is mounted.
Remove receiving flask
➜ Hold receiving flask with one hand.
➜ Loosen knurled screw of clamp.
➜ Remove clamp from flange.
Downloaded from www.Manualslib.com
Operation
Danger / Danger:
Risk of scalding! / Risque de brûlures !
If the evaporating flask has not cooled down it may cause severe
scalding. /
Si le ballon d'évaporation n'a pas refroidi, il peut entraîner des brûlures
graves.
▪ Ensure that the evaporating flask has cooled down prior to
exchanging it./
S'assurer que le ballon d'évaporation a refroidi avant de le changer.
▪ The evaporating flask should not show a temperature above
50 °C or 122 °F./
Le ballon d'évaporation ne devrait pas afficher une température
supérieure à 50 °C ou 122 °F.
▪ Wear protective clothing. / Porter des vêtements de protection.
▪ Wear appropriate gloves to ensure a safe grip./
Porter des gants appropriés afin d'assurer une prise sûre.
manuals search engine
Knurled screw
39
Clamp