Heidolph Hei-VAP Precision Originalbetriebsanleitung Seite 55

Condenser:
Glassware set G5 dry ice
✓ Condenser is mounted to the drive.
➜ Screw inlet tube with inlet valve onto
opening opposite of vapor tube
(see chapter "Assembly, Inlet tubes").
➜ If using inert gas screw inlet tube with
inert gas valve onto opening above
inlet valve.
➜ Place red seal ring into notch at top of
condenser flange.
➜ Place white PTFE ring with collar up on
to condenser flange.
➜ Insert the jacket trap into condenser.
✓ Due to vacuum inside condenser, the
flange is drawn in and the system is
tight.
➜ To protect the dry ice, place black cap
on top.
Downloaded from www.Manualslib.com
Assembly
manuals search engine
Inert gas valve
Inlet valve
55