Maintenance; Maintenance Menu; Test Menu; Input / Output Menu - Desoutter CVIC II Bedienungsanleitung

CVIC II

6 - MAINTENANCE

This section helps the maintenance operator to:
● Check that the controller + tool assembly operates
correctly.
● Know the number of cycles run.
● Tune the system manually or automatically.
● Adjust the contrast of the display, update controller
date, select the language and program an access
code.
● Change the memory batterie.

6.1 - MAINTENANCE menu

6.1.1 - TEST menu

04/2010
Original instructions
6.1.1.1 - START SPINDLE menu
The START SPINDLE menu allows you to check the
correct operation of the tool.
● Select the speed and rotation direction (Directi
reverser for a hand held tool or in the menu for a
fixed tool) then press the trigger for a hand held tool
of EC type or press the On button for a fixed tool of
MC or MCL type.
● Select Reset to reset the display.
● Select Ventil. to start the fan and check its working
order.

6.1.1.2 - INPuT / OuTPuT menu

1
3
Legend
1 Input no 1
2 Input no 8
3 Output no 1
4 Output no 8
The INPUT/OUTPUT menu allows you to check the
status of inputs and to test the outputs.
Testing the outputs:
● The cursor blinks on output 1 (3)
● Press
● Press
● The selected output is or is not enabled.
● Then it is possible to check the efficiency of the
status change of this output on the corresponding
input, for example on the PLC.
to move the cursor.
to validate the box or not.
6159932190
Issue no: 02
2
4
39 / 62