Access Code - Desoutter CVIC II Bedienungsanleitung

6159932190
Issue no: 02

4.2.5 - Access code

The access code is used to protect the controller against
any keying error.
At the time of delivery, no code is programmed; the
icon is displayed on the screen.
Enter the new code.
12 / 62
Original instructions
8 alphanumerical characters maximum.
● Press or
● Press to validate.
● Press or
character (2).
Lock access by entering your code again. The padlock
icon will lock
If an access code has been programmed and
the operator wants to change the data stored,
it is necessary to enter the code each time the
controller is switched on.
CVIC II
1
2
to write (1).
to position the cursor under the next
meaning that writing is prohibited.
04/2010