6159932190
Issue no: 02
5.7.2 - EThERNET CONFIguRATION menu
Parameter
Comment
IP Address
IP address of the controller in the
network
Mask
In case of integrating the controller in
an existing network, please contact
your administrator to get the correct
mask
gateway
to be set when the network uses
"Gateway"
Ping IP
IP address of another equipment
connected to the controller
Nb ping
Starting the controller, execute several
startup
pings at the corresponding address
34 / 62
Original instructions
5.7.3 - EThERNET SOCKET 1 menu
The ethernet socket 1 is used for the following function:
● PC transfer (used to communicate with CVIPC 2000
software)
5.7.4 - EThERNET SOCKET 2 menu
The ethernet socket 2 is used for the following functions:
● CVINET data collector
● ToolsNet data collector (this choice needs to get a
license).
CVIC II
04/2010