Cp450G Torch; Water Console - Cebora PLASMA PROF 166 Betriebsanleitung

2.7 CP450G TORCH

The CP450G torch is a multi-gas appliance cooled by
means of liquid coolant, suitable for bevel cutting and in
compliance with the IEC 60974-7 standard.
It is suitable for the use of plasma gas such as: air, argon
Ar, nitrogen N2, oxygen O2, mixture H35 (35% hydrogen
H2 – 65% argon Ar) and mixture F5 (5% hydrogen H2 –
95% nitrogen N2); of secondary gases such as: air, argon
Ar, nitrogen N2, oxygen O2; of auxiliary gases such as:
air and nitrogen N2. Used with the Plasma Prof 420 HQC
power source, max cutting current is 420A at 100% of
duty cycle.
Various versions exist of the CP450G torch depending on
the application: on pantograph or on robotized systems.
The net weight of the torch complete with cable varies be-
tween 8 kg and 12 kg depending on the different lengths.
Robotized
applications
46
Pantograph
applications
Fig. 8

2.8 WATER CONSOLE

The WARTER CONSOLE is an accessory device designed
to manage the water flow necessary for cutting Stainless
Steel and Aluminum, if using the combination nitrogen N2
/ water H2O.
Refer to the instruction manual of this accessory for the
mode operation descriptions.