Software Enabling - Tecnotest SL31205 Bedienungsanleitung

______________________________________________________________________ OSCILLOSCOPE KIT
1.0 -

SOFTWARE ENABLING

•
Select the SCOPE/MULTIMETER function from the APPLICATION MANAGEMENT
page; in case the following page is displayed, fit in the special port (9), the
enabling hardware key (6) contained inside the Oscilloscope Kit.
After assessing the key validity a personal code is displayed to be reported on the back
cover, in the special box.
•
To display the personal code stored in the INFORMATION page, select F4 from
the INSTRUMENT SELECTION page.
Write the following identification data inside the boxes on the back cover:
PERSONAL CODE VERSION
STARGAS SERIAL NUMBER
Keep the manual with care to have the code always within reach.
OPERATING INSTRUCTIONS

39