When the inlet is activated the pump blocks and the "F1" signal is given
When the inlet is activated the pump blocks and the "F1" signal is given
Control with clean contact
E.g. Use on auxiliary pressure inlet M/T and T/T
Control with clean contact
When the inlet is activated the pump blocks and the "F3" signal is given
Control with clean contact
The functions activated in the examples above refer to the factory setting conditions of the inlets.
E.g. Use on float inlet M/M
Control with clean contact
E.g. Use on float inlet M/T e T/T
When the inlet is activated the regulating pressure becomes "P1"
E.g. Use on disabling inlet M/T and T/T
ENGLISH
Figure 4: Input connection
63
Control with external voltage
Control with external voltage
Control with external voltage