Function Buttons And Displays - Gaggenau ik 300 254 Gebrauchsanleitung

de en

Function buttons and displays

11
Fast freeze button ON/OFF
Press the
Fig. 2/11) until it illuminates
(fast freeze ON). Press the
button until it goes out
(fast freeze OFF).
Fast freeze is used to freeze
large quantities of fresh food
and should be switched ON
up to 24 hours before the
fresh food is placed in the
freezer compartment. When
fast freeze has been switched
ON, the refrigerating unit
operates continuously. The
freezer compartment drops
to a very low temperature.
Fast freeze automatically
switches OFF at the latest
24 hours after it was switched
ON (the
With the help of the
you can also set the freezer
compartment temperature,
see the chapter Switching
functions".
12 Select button for Display 2/20
a) The set temperature in the
refrigerator compartment
(if the
illuminated).
b) The set temperature in the
refrigerator compartment
(if the
illuminated).
38
button (see
button goes out).
button
button is NOT
button is NOT
13
Warning button
A flashing
display for the freezer
compartment (Fig. 2/19)
denote a warning (the freezer
compartment was or is too
warm).
The flashing display for
the freezer compartment
(Fig. 2/19) indicates the
warmest temperature which
the freezer compartment
reached when the fault
occurred.
The warning signal may
occur, e.g.
Following a power failure
If the freezer compartment
door has not been closed
properly.
If the door has been open
too long.
if large quantities of fresh
(warm) food are being put in.
When the
the warning signal is cancelled
and the flashing stops.
The current temperature in the
freezer compartment is now
displayed. (If the button and
display continue flashing, the
freezer compartment is still
too warm). If the warning
signal continues for several
hours, there is a fault (call
customer service). Temporarily
transfer produce from the
freezer compartment and
cool fresh" compartment into
the refrigerator compartment
and select its coldest
temperature (+4 °C).
button and
button is pressed,