Grundlegende Befehle ($) - US Robotics Courier Befehlshandbuch

Grundlegende Befehle ($)

Wenn Sie den Befehl AT$ eingeben, zeigt das I-modem einen
Teilüberblick der grundlegenden Befehle an (siehe Abbildung
14.1).
at$
HELP, Command Quick Reference (CTRL-S to Stop, CTRL-C to
Cancel)
#$ HELP, Octothorpe Commands
Mode
*$ HELP, Star Commands
Clock Mode
&$ HELP, Ampersand Commands
Volume
%$ HELP, Percent Commands
Volume
A/ Repeat Last Command
Volume
AT Command Mode Prefix
Volume
A Answer Call
Bn n=0
Until CD
n=1
On
Cn n=0
During Dial
n=1
Dn Dial a Telephone Number
& Retrain
n=0..9#*TPR,;W@()-
& Speed Shift
DL Dial Last Phone Number
DSn Dial Stored Phone Number
Sent
D$ HELP, Dial Commands
Result Codes)
En n=0
On Answer
n=1
to "n"
Fn n=0
n=1
Hn n=0
n=1
Responses
In n=0
Responses
n=1
Codes
n=2
Result Codes
n=3
Result Codes
V.32 originate mode
HST originate mode
Transmitter Off
Transmitter On
No Command Echo
Echo Command Chars
Online Echo
No Online Echo
Off Line (Hang Up)
On Line
Product Code
Checksum
RAM Test
Modem Identification
Kn n=0 Call Duration
n=1 Real Time
Ln n=0 Lowest Speaker
n=1 Low Speaker
n=2 Med Speaker
n=3 Hi Speaker
Mn n=0 Speaker Off
n=1 Speaker On
n=2 Speaker Always
n=3 Speaker Off
On n=0 Return Online
n=1 Return Online
n=2 Return Online
P Pulse Dial
Qn n=0 Result Codes
n=1 Quiet (No
n=2 Verbose/Quiet
Sr=n Sets Register "r"
Sr? Query Register "r"
S$ HELP, S Registers
T Tone Dial
Vn n=0 Numeric
n=1 Verbal
Xn n=0 Basic Result
n=1 Extended
n=2-7
Hilfezeigen
Advanced
81