02.2005
Key
Significance
Toggle key
Raise key
Lower key
Hold toggle key
and depress raise
key
Hold toggle key
and depress lower
key
Siemens AG
6SE7087-6KP60
SIMOVERT MASTERDRIVES
•
For switching between parameter number, parameter index
and parameter value in the indicated sequence (command
becomes effective when the key is released)
•
If fault display is active: For acknowledging the fault
For increasing the displayed value:
•
Short press = single-step increase
•
Long press = rapid increase
For lowering the displayed value:
•
Short press = single-step decrease
•
Long press = rapid decrease
•
If parameter number level is active: For jumping back and forth
between the last selected parameter number and the
operating display (r000)
•
If fault display is active: For switching over to parameter
number level
•
If parameter value level is active: For shifting the displayed
value one digit to the right if parameter value cannot be
displayed with 4 figures (left-hand figure flashes if there are
any further invisible figures to the left)
•
If parameter number level is active: For jumping directly to
operating display (r000)
•
If parameter value level is active: For shifting the displayed
value one digit to the left if the parameter value cannot be
displayed with 4 figures (right-hand figure flashes if there are
any further invisible figures to the right)
Table 8-4
Operator control elements of the PMU (Compact PLUS type)
Operating Instructions
Parameterization
Function
8-19