Switch Settings - Siemens simovert masterdrives Betriebsanleitung

06.2005

Switch settings

Siemens AG 6SE7087-6KP60
SIMOVERT MASTERDRIVES
Switch Meaning
S3 (4,5,6) AI2: Switching between current/voltage input
• •
Jumper 5,6 Voltage input
• •
Jumper 4,5 Current input
S4 (1,2,3) AO2: Switching between current/voltage output
• •
Jumper 1,2 Voltage output
• •
Jumper 2,3 Current output
To set switches S3 and S4 on units with a width of up to 90 mm, the
side wall has to be removed; on units with a width of more than 90 mm,
the front cover has to be removed. See Chapter 5.2 "Installing the
optional boards".
CU
S3
S4
Fig. 7-6 Setting of switches S3 and S4
Operating Instructions
(default setting)
(default setting)
PBI
6
4
3
1
Connecting-up
7-11