look S96 Montageanleitung Seite 32

GB
Fixing the LOOK patented stem into the frame
has the advantage of an absolute grip at the
bottom, while also allowing absorption of
vertical and horizontal vibrations in addition
height adjustment. These functions are
carried out using a single screw and the
force required on the various parts is not
excessive.
32
Fitting the stem into the frame
OPERATIONS:
1/ Cut the saddle tube to length
2/ Fit the stem into the frame
IMPORTANT: Since cutting the tube is an
operation that cannot be undone, follow
the instructions below exactly.
In the event that the measurement for
the height of the saddle is not known
with certainty, proceed in two stages,
firstly cutting the tube to a longer length
(so reduce the length to be cut off (given
below) by a few mm).