Product Description; Combination Possibilities; Indications For Use; Service Life - Ottobock 1C62 Triton Harmony Gebrauchsanweisung

(5) 4Y360 Muffler
(6) 2R117 Socket Connector (2x)
(7) 4Y383 Exhaust Flange Kit

2 Product description

2.1 Combination possibilities

This prosthetic component is compatible with Ottobock's system of modular connectors. Func-
tionality with components of other manufacturers that have compatible modular connectors has
not been tested.

2.2 Indications for use

The 1C62 Triton Harmony is a carbon fiber foot and is a component of the Harmony Elevated
Vacuum System, which also includes a Total Weight Bearing Socket, Polyurethane Liner, Air Wick
and Sealing Sleeve.
The product is to be used solely for lower limb prosthetic fittings.

2.3 Service life

INFORMATION
This component has been tested according to ISO 22675 standard for two million load cycles.
Depending on the amputee's activity this corresponds to a duration of use of two to three years.
We recommend carrying out regular yearly safety checks.

2.4 Field of application

Our components perform optimally when paired with appropriate components based upon weight
and mobility grades identifiable by our MOBIS classification information and which have appro-
priate modular connectors.
1C62 = 21 – 24 cm
Recommended for amputees with Mobility Grade 3 and 4 (unrestricted outdoor walkers
and unrestricted outdoor walkers with particularly high demands).
Approved for patient weight of up to 100 kg (220 lbs).
1C62 = 25 – 30 cm
Recommended for amputees with Mobility Grade 3 and 4 (unrestricted outdoor walkers
and unrestricted outdoor walkers with particularly high demands).
Approved for patient weight of up to 125 kg (275 lbs).
1C62 = 25 – 30 cm
Recommended for amputees with Mobility Grade 3 (unrestricted outdoor walkers).
Approved for patient weight of up to 150 kg (330 lbs).
Please refer to the selection chart below to determine the appropriate stiffness required according
to Ottobock recommendations.
Ottobock | 21