Assembling The Adapter Plate To Avantgarde Cs, Cv - Ottobock e-support Bedienungsanleitung

Mounting Instructions for the Adaption of the "e-support" to the Avantgarde SL, V, TR, D, CV, CS, or Start Plus
4..Assembling.the.Adapter.Plate.to.Avantgarde.cs,.cV
In dependency of the horizontal rear wheel position, the adapter can be installed in three positions: "active", "stand-
ard" and "passive" (see Section 4.1).
To check if the adapter plate is correctly assembled, refer to the preceding chapters. The position of the fitting in the
adapter plate must be checked and if necessary be re-adjusted. The height of the fitting to the adapter plate is 15.mm.
4.1 Mounting Positions of the Adapter
4.2 Checking the Battery Position
68 | Ottobock
Mounting position of the adapter for "active" rear wheel position.
INFORMAtION
Observe the information in section 4.2.
Mounting position of the adapter for "standard" rear wheel position.
INFORMAtION
Observe the information in section 4.2.
Mounting position of the adapter for "passive" rear wheel position.
INFORMAtION
Observe the information in section 4.2.
Check the position of the e-support battery in relation to the side panel (see
picture 10, arrow).
If they get in contact, the battery case attachment must be adjusted.
e-support