Specifications - Ottobock e-support Bedienungsanleitung

specifications

e-support
Power assist type:
Drive train:
Steering method:
Speed:
Distance range:
Tire size:
Motor power:
Maximum torque moment:
Weight:: e-support drive wheel 24"
Battery, complete
e-support complete
Maximum load capacity:
Ambient operating temperature:
Storing temperature:
Battery:
Fuse:
Battery storage temperature:
Charger:
Charging time: Rapid charging:
Refresh charging:
charger
Power
Fixed output
Battery
Plug-in fuse
Charging time
Ambient operating temperature
* The travel distance varies greatly depending on the terrain and travel conditions. The conditions in this case are as
follows: 24 inch/ charged battery (new)/ normal temperature of 25°C / consecutive travel on straight level road/ travel
with a wheelchair speed of 5 km/h
e-support
A-type: type assist 1.5
B-type: type assist 3.0
Wheel in type, direct rear wheel drive
Right and left push ring steering
0 to 6 km/h
15 km or more
24 x 1 3/8
24V, 2x 90W
A-type: 25 Nm, B-type: 20 Nm
right wheel: 7 kg, left wheel: 6 kg
2.9 kg
16 kg
125 kg
-5 to 40 °C
-20 to 60 °C
nickel hydrogen (NiMh) 24 V x 6.7 Ah
20 A Plug-in fuse
10 to 25 °C
AC 85 to 275 V, 50/60 Hertz
2 to 3 hours
about 9 to 10 hours
AC 85 to 275 V, 50/60 Hertz
150 W (when charging)
nickel hydrogen (NiMh) 24 V x 6.7 Ah,
30 A
Rapid charging, Approximately 2 to 3 hours
Refresh charging, Approximately 3 to 13 hours
5 to 40 °C
Specifications
Ottobock | 65