Abicor Binzel iCAT Betriebsanleitung Seite 34

3 Product description
The following data only apply in connection with the iCAT WH:
Type Type of
cooling
ROBO WH W300 liquid
ROBO WH W500 liquid
ROBO WH W600 liquid
Tab. 8 Product-specific torch data (EN 60 974-7) in connection with iCAT
1Applications above 360A are possible in connection with the liquid-cooled torches
ROBO WH W500 using a special power-water-cable. It is available upon request.
2Use of the liquid-cooled ROBO WH W600 requires a special power-water-cable. With applications
above 500 A a cable assembly with two power-water-cables is available upon request.
The load data were determined under standard conditions, at low to medium heat of reflection,
free air circulation and an ambient temperature of approx. 28°C When used under more
strenuous conditions, the load data must be reduced by 10-20%.
3.2 Abbreviations
ROBO WH
Tab. 9 Abbreviations
EN - 10
Load Duty
cycle
CO M21
2
A A %
320 300 100
1 1
360 340 100
2 2
500 500 100
Automatic welding torch, liquid-cooled

Wire Gas
flow
Cooling
capacity
min.
mm l/min W
0,8 - 1.2 ca. 20 800
0,8 - 1.6 10-20 800
0,8 - 1.6 10-20 800
iCAT WH
Cooling data
Flow Flow
pressure
min. min. max.
l/min bar bar
1 1.5 3.5
1 1.5 3.5
1.5 1.5 3.5