Abicor Binzel iCAT Betriebsanleitung Seite 26

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 EU Declaration of Conformity
2 Safety
2.1 Designated use
2.2 Responsibilities of the user
2.3 Personal protective
equipment (PPE)
2.4 Classification of the warnings
2.5 Emergency information
3 Product description
3.1 Technical Data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Putting into operation
6.1 Maintenance position of
the robot
6.2 Mounting the corrugated
hose clamp
®
6.2.1 Motoman
® ®
6.2.2 ABB , Reis , OTC
EN - 2
EN-3
EN-4
EN-6
EN-6
EN-6
EN-6
EN-7
EN-7
EN-8
EN-8
EN-10
EN-11
EN-11
EN-11
EN-12
EN-12
EN-12
EN-13
EN-13
EN-13
EN-14
®
EN-14
6.3 Fastening the iCAT WH and
cable assembly to the robot
6.4 Replacing the cable assembly
6.4.1 Dismounting the cable assembly EN-17
6.4.2 Removing the cable assembly
from the iCAT-WK adapter
6.5 Mounting the liner
6.6 Attaching the ROBO WH
torch neck
7 Operation
8 Putting out of operation
9 Maintenance and cleaning EN-21
9.1 Cleaning the adapter, WK
and iCAT WH
9.2 Cleaning the clamping cylinder
10 Troubleshooting
11 Dismounting
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
iCAT WH
®
national
EN-15
EN-17
EN-19
EN-19
EN-20
EN-20
EN-21
EN-22
EN-23
EN-23
EN-24
EN-25
EN-25
EN-25
EN-25