Key Functions - ECOLAB Elados EMP E60 serie Kurz- Betriebsanleitung

5 Startup
Personnel:
Protective equipment:
NOTICE!
During startup, the system must be vented (see main operating manual of
the corresponding pump
5.1 Switching the pump on / off (EMP KKS, EMP II, EMP III)
n
n
n
n
5.2

Key functions

NOTICE!
You will find a detailed menu description in the respective instruction
manual as well as connection and setting examples (see
2.1 'General safety advice' on page 4
n Mechanic
n Qualified electrician
n Service personnel
n Specialist
n Protective eyewear
n Chemical-resistant protective gloves
n Safety shoes
Ä Chapter 2.1 'General safety advice' on page 4).
Switching on the pump
Press START/STOP key (min. 2 sec.).
Switching off the pump
Press START/STOP key (min. 5 sec.).
MENU/EXIT function entry and exiting of the menu levels (keep keys pressed down
together)
5 Modify set values upwards
6 Modify set values downwards
Start the pump
Stop the pump
Confirmation key (ENTER) for set values
Test function (endurance test)
17
Startup
Ä Chapter
MAN033535 Rev. 06-04.2020