Description Of Operating And Display Elements - Jungheinrich EFG-Vac 25 Betriebsanleitung

2

Description of Operating and Display Elements

Item Operating resp.
display element
1 Steering wheel
2 Multifunction display
3 Parking brake (rocker
handle switch)
4 Steering column locking
5 Key switch
6 Accelerator pedal
7 Brake pedal
8 Travel direction switch
MULTIPILOT
Horn
Auxiliary hydraulics (ZH3)
9 Switch for optional
equipment
10 EMERGENCY OFF
master switch
11 for dual pedal control:
Accelerator pedal
“"reverse”"
12 for dual pedal control:
Brake pedal
13 for dual pedal control:
Accelerator pedal
“"forward”"
14 Travel direction switch
15 Horn
16 SOLOPILOT
Lifting - Lowering
17 SOLOPILOT
Lifting mast - tilting
18 SOLOPILOT
Auxiliary hydraulics (ZH1)
Side shift
19 SOLOPILOT
Auxiliary hydraulics (ZH2)
20 Toggle switch
Auxiliary hydraulics (ZH3)
t = Series equipment
E 2
Function
t Steering the truck by five turns of the steering wheel
from left to right.
t Display of the most important travel and lifting
parameters, warning indicators, indication of
incorrect operation and service display, as well as
battery charge indicator and operating hour meter.
t Engage manually if service brake fails. Normally the
parking brake (spring-loaded brake) operates
automatically at standstill.
Optical display:
red = Parking brake engaged
green = Parking brake disengaged
t The steering is adjusted to the desired distance and
then locked in this position.
t Switches control voltage on and off. Removing the
key secures the truck against switching on by
unauthorised personnel.
t Driving speed is controlled continuously.
t Truck is decelerated.
o
The desired travel direction is set.
o
Controls the functions of the lifting mast.
o
Triggers a warning signal.
o
Toggling from ZH2 to ZH3.
o e. g. display for working light ON
t Switches power supply on and off.
o Truck drives backwards when actuated
Driving speed is controlled continuously.
o Truck is decelerated.
o Truck drives forwards when actuated
Driving speed is controlled continuously.
t The desired travel direction is set.
t Triggers a warning signal.
t The load fork is lifted/lowered.
t The load fork is tilted forward/backward.
o The load fork is shifted right/left.
o For hydraulic attachments.
o Toggling from ZH2 to ZH3
o = Optional equipment