Shimano STEPS E8000 Originalbetriebsanleitung Seite 99

6.3.1.1 Clearing trip data
Under this main menu item, you can reset the  5.6 Changing the ride data
display Page EN-34 TRIP (travel route), TIME (travel time), Ø km/h (average
speed) and MAX (maximum speed) ride data to their default values.
Proceed as follows:
1. Navigate to the "Delete" item as described in "Configuring settings in
the main menu".
2. Select "TRIP" using the / buttons. The selection is highlighted
white.
3. Confirm by pressing the Display button.
You can choose between:
OK TRIP, TIME, Ø km/h and MAX are deleted.
Cancel
The deletion process is interrupted.
4. Select the required option using the / buttons.
The selection is highlighted white.
5. Confirm by pressing the Display button. You return to sub-level 1.
6.3.1.2 Time
Proceed as follows to set or change the time:
1. Navigate to the "Time" item as described in "Configuring settings in
the main menu".
You can choose between:
Hour
00 to 23
Minute
00 to 59
Clock
Set hours
2. Use the / buttons to select the values required. The selection is
highlighted white.
Press the or button down continuously to change the
values rapidly.
3. C onfirm by pressing the Display button briefly. You move to the next
option.
4. Once you confirm the minutes by pressing the Display button, you will
return to the main menu.
Original User Guide | Pedelec Shimano Steps E8000 Version 1
Clock
Set minutes
EN-39