Power Consumption - Shimano STEPS E8000 Originalbetriebsanleitung

You can choose between:
Display
message
BOOST
km/h
BOOST
TRAIL
km/h
TRAIL
ECO
km/h
ECO
km/h
ECO
OFF
GO
2. Assist starts working as soon as you start pedalling. Assistance is
deactivated as soon as you stop pedalling or you reach a speed of
25 km/h.
EN-32 Original User Guide | Pedelec Shimano Steps E8000 Version 1
Assist
Assist function is working hard.
Assist is working with medium power.
Assist is working with low power
When the charge level drops below 10%, the
system switches automatically to ECO mode. Assist
is working with low power.
This mode provides no pedal assistance when the
system is switched on.
Push assistance  5.5 Activating push assistance Page EN-33
Power
Tip
consumption
High Use BOOST when climbing steep hills, for example.
Medium Use TRAIL on gentle slopes or even surfaces, for example.
Low Use ECO on extended even surfaces, for example.
Low Use ECO on extended even surfaces, for example.
Set the assistance to OFF to reduce battery consumption (for
Very low
example, when the charge level is low).